hi, i have my new uc33e and i have problems to setup
how i setup the parametrs of efeccts , bypass, activate layers, etc with the midi uc33
i can setup the velocity, opacity and playhead in the 3 layers but the other not.
i like a litlle help plz
im from venezuela- south america
www.myspace.com/bakro
CONFIGURE UC33 WITH RESOLUME
I had the same problem with my uc16 and search on the forum lead me to these instructions which work for both the 16 and 33.
Ok, in order to use the Buttons on the UC33 Midi-Controller in Resolume (for playing Clips, bypassing effect layers etc.) you need to assign them to notes. Therefore you've got to do the following:
1. Press the button you want to programm
2. Press "ASSIGN" and enter 147 (that's the controller number for notes)
3. Press the "Data MSB" button twice and enter 100
4. Press the "Data LSB" button twice and enter 000
5. Press the "PROGRAM" button twice and enter the Midi-Number for notes you want to assign to the button (doesn't really matter which note you choose, you can start with 01 and assign the rest of the keys to 02, 03, 04, etc.)
6. Choose the next button you want to program and start with 1) again
7. When you're finished Store the Program, push "STORE" and enter the number where you want to safe it (usually no 33 is preset for custom programming)
When you're done with that, load the number 33 (press "RECALL and enter 33) and simply choose the function in Resolume preferences and press the button you want to assign to it...done!
It is quite easy to do and will allow you to use the buttons to trigger clips, change decks, add and bypass effects, change play modes etc.once they are assigned to midi notes.
Ok, in order to use the Buttons on the UC33 Midi-Controller in Resolume (for playing Clips, bypassing effect layers etc.) you need to assign them to notes. Therefore you've got to do the following:
1. Press the button you want to programm
2. Press "ASSIGN" and enter 147 (that's the controller number for notes)
3. Press the "Data MSB" button twice and enter 100
4. Press the "Data LSB" button twice and enter 000
5. Press the "PROGRAM" button twice and enter the Midi-Number for notes you want to assign to the button (doesn't really matter which note you choose, you can start with 01 and assign the rest of the keys to 02, 03, 04, etc.)
6. Choose the next button you want to program and start with 1) again
7. When you're finished Store the Program, push "STORE" and enter the number where you want to safe it (usually no 33 is preset for custom programming)
When you're done with that, load the number 33 (press "RECALL and enter 33) and simply choose the function in Resolume preferences and press the button you want to assign to it...done!
It is quite easy to do and will allow you to use the buttons to trigger clips, change decks, add and bypass effects, change play modes etc.once they are assigned to midi notes.
hi
i use uc33e and trigger finger,
to configuring the buttons with enigma much easyer.
http://www.m-audio.com/index.php?do=sup ... 768&dl=yes
when you want to use more features and not enough 13 nutton use presets,
or an other midi keyboard.
i use uc33e and trigger finger,
to configuring the buttons with enigma much easyer.
http://www.m-audio.com/index.php?do=sup ... 768&dl=yes
when you want to use more features and not enough 13 nutton use presets,
or an other midi keyboard.
I fmoney allows id get the Codanova VMX VJ, I've just got one and its simply amazing for resolume, As if its made for it. I've used a UC33e but the VMX VJ is another league. Well worth checking out, Im amazed by it
http://www.codanova.com/article-5098025.html
http://www.codanova.com/article-5098025.html