Midi-Feedback

[VJVertex]

I used the forum search function, but didn´t find anything...

will there be a midi-feedback soon?
for example, if u use controller like APC40 or Behringer BRC2000 and u change anything with the mouse the controller gets the information and shows it.

[werlin]

yes this was already asked for before, and i think they're on it... yesterday i bought an apc20 also, so im waiting on it too

[Joris]

Midi out, OSC out and DMX out are all very high on our priority list.

[newfuturenow]

My monome would like this very much, I have given up on the midi feedback route via bomes etc . . am just gonna sit tight and wait for Full midi / osc out Resolume implementation.

[VJVertex]

i´m using bome, it´s ok but not perfect... i´m looking forward for midi-feedback, hope we´ll get it soon.

[premiermalvado]

ive tried several apps to at least map resolume to my monome hardware to get visual aid.

coding for me gets very messy ind i slowly assimilate information so its been a pain and stilli havent set up properly.

i decided to try OSC, this way i can use a third piece of software that will do the job of turning leds on and off.

ive tried a couple of max patches from some users but they were very specialized , i tried creating one, i have the lights part but havent been able to send the messages to resolume, i can understand locations (layer/efects/etc) but coding the message out is getting out of my hands.

so i decided 2 give processing a try, seems fairly understandable as well, and there are a lot of sketches already implemented to do the job.

one ive figured out to program is monomecontrol 0.52 , ive managed to program all monome buttons with toggles, pushes, etc. every light works great but when i set up avenue to listen to my host port so i can do the mapping, monomecontrol freezes actually monome via osc is not recognized at all) this sounds to me it may be causing some conflicts with monomeserial app/driver.


wish some one out here could help me sort everything out.

[Tschoepler]

[…]but coding the message out is getting out of my hands.[…]

for MAX: you need the "opesoundcontrol" object in the first place. you might already have it. if not, you can get it here http://www.maxobjects.com/?v=objects&id ... d_format=0. just open the *.maxhelp file that comes with the zip and the rest should be pretty much self-explanatory. i think it's very well documented. just edit one of the containing message-objects (the gray ones) for example to /composition/video/scale/0.5. that should scale your comp to 500%. don't forget to change the port either inside the helpfile or inside avenue. the ip should be fine (127.0.0.1).