DMX via ArtNet

[simonsen@hnt.dk]

Hi
I have purchased Arena, and I am quite happy with it, however,there seem to be a bug, when controlling it with DMX via Artnet. It is no problem to get it running, but when creating a costum mapping, and saving the session, it does not remenber the DMX mapping, when reopening the show!
What to do?
Win 7 pro / arena 4.01

[cosmowe]

Does Resolume loses the whole mapping ...or only some DMX mappings?
I ask because I had equal troubles with it some time ago....but in my case only the master opas dmx map was lost.


Greetz
cosmowe

[simonsen@hnt.dk]

I think You are right, only the masters loose the mapping...!

[cosmowe]

Here the link to my old topic:
viewtopic.php?f=12&t=8781&p=32578&hilit ... ter#p32578

Hmmm... they thought they fixed it.


Greetz
cosmowe

[simonsen@hnt.dk]

And that was even a Avenue, and not Arena...
Resolume, can You fix it again?

[Joris]

I'm sorry, but I just tried the following:

1. Start with the demo composition
2. Turn on ArtNet in the DMX tab of the preferences
3. Enable AutoMap.
4. Checked to see that Channel 1 was being received.
5. Disabled AutoMap.
6. Mapped Channel 1 to Master opacity
7. Checked to see if it worked.
8. Saved the composition.
9. Restart Resolume.

At this point, Channel 1 is still controlling the Master opacity like it was before the restart. If you follow these steps, are you experiencing differently?