I don't know why I havn't posted about this before.. but its been a long standing issue that every now and then the equilivant to the CTRL ket gets virtually stuck while in Resolume and then the computer is stuck in multi selection mode and I cant get out of it.. It requires a computer restart.. Im not sure what triggers.... and once it happens its system wide and the same behavior in the windows file system
It was happening back in Resolume 3.. and became much less in v4.. but its happening a bit more latley.. And this is not just one device.. Its happening on different machines..
Like I said.. its rare.. but it requires a computer restart and thats a real problem.. It probally happens once per two shows (thru the run of programming plus show usage)..
Does anyone else experience this? I'd love to wipe this bug out..
----
Windows 7 Pro
Resolume 4.16 (but been happening since I started with v3)
i7 machines..
16gb ram on all machines..
CTRL Key Gets Stuck - Stuck in multi selection mode
Re: CTRL Key Gets Stuck - Stuck in multi selection mode
This happend to me too from time to time....
Re: CTRL Key Gets Stuck - Stuck in multi selection mode
i think you mean shift key is stuck...
one solution expect rebooting the system is:
press ctrl, shift (on both sides) and hold shift all together and it should work for at least a few klicks
one solution expect rebooting the system is:
press ctrl, shift (on both sides) and hold shift all together and it should work for at least a few klicks
MainSys: Z77 UP5,3570K,32GB Ram,GTX 285, M3 128GB,4x3TB R5@LSI9750
VJSys 1: 990FX UD5,X6 1045T,16GB Ram,GTX970+610+610,M3 128GB,3x1TB R0
MBP 3.1; Schenker A102 (650m) & P702 (675m)
VJSys 1: 990FX UD5,X6 1045T,16GB Ram,GTX970+610+610,M3 128GB,3x1TB R0
MBP 3.1; Schenker A102 (650m) & P702 (675m)
Re: CTRL Key Gets Stuck - Stuck in multi selection mode
Ahhh.. no I think (and thinking about this as I type).. Its a CTRL stick not SHIFT.. Shift would mass select things in groups.. while CTRL is individual selection.. (At least on a PC)..HerrNieDa wrote:i think you mean shift key is stuck...
one solution expect rebooting the system is:
press ctrl, shift (on both sides) and hold shift all together and it should work for at least a few klicks
I could be wrong.. I will have to observe closer next time it happens.. Either way.. I will try your suggestion. (I'm not sure what holding it down on both sides does though.. Holding down two ctrl keys just acts as one)
Re: CTRL Key Gets Stuck - Stuck in multi selection mode
This is a particularly elusive little bug that we managed to stomp for the 4.1.7 release.
Turns out that when you tell Windows to not activate the screen saver when Resolume is running, it will do this by pretending to press the SHIFT key from time to time.
Which will then get stuck if you accidentally press it at the same time.
Sigh.
Turns out that when you tell Windows to not activate the screen saver when Resolume is running, it will do this by pretending to press the SHIFT key from time to time.
Which will then get stuck if you accidentally press it at the same time.
Sigh.
Re: CTRL Key Gets Stuck - Stuck in multi selection mode
Glad you found it.. Bring on V 4.17 then!
