EzCap 60+ on Win8 [SOLVED!]

Bro, does your rig even lift?
Post Reply
pfelberg
Posts: 678
Joined: Thu Sep 29, 2005 04:49
Location: Rio de Janeiro . Brazil

EzCap 60+ on Win8 [SOLVED!]

Post by pfelberg »

Hello everyone,
I have succesfully intalled EzCap 60+ on Windows 8.
Of course, Arena recognizes te video signal (no comments about the hardware quality) and everything is fine, but the color. I am capturing black and white images.
I don´t know about any driver control panel, so I have no idea where to change/ hw to fix that.
Any clue is very welcome.

Thank you,

Paulo
Last edited by pfelberg on Tue Sep 09, 2014 12:37, edited 1 time in total.

Zoltán
Team Resolume
Posts: 7537
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: EzCap 60+ on Win8

Post by Zoltán »

try to switch from NTSC to PAL

if you are on PAL, then to NTSC.

you should have a device control panel button in the clip

edit:
actually it is called Settings

the control panel for my easyCap looks like this:
settings.jpg
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

pfelberg
Posts: 678
Joined: Thu Sep 29, 2005 04:49
Location: Rio de Janeiro . Brazil

Re: EzCap 60+ on Win8 [SOLVED!]

Post by pfelberg »

Thanks!!!
It would never occour to me to look after some config on clip´s properties.
Now it is perfect! 100%!

thank you.

I will include the procedures I did to install EzCap 60+ on win8 bellow:
- Copy CD install content to your HD;
- Select Setup.exe (right click);
- Go to Compatibility tab, select run in compatibility mode and set to win7 or win8;
- Also check box run as administrator;
- Run Setup. It´s done!

Paulo

Post Reply