ReSync clears random BPM Sync playback
ReSync clears random BPM Sync playback
A clip is happily playing in random BPM Sync mode. On resyncing the beat, the clip reverts to sequential playback although the random [R] button is still active. Clicking [R] again puts the clip back into random mode. Repeatable on my Arena 4.1.11 on Windows 7.
Re: ReSync clears random BPM Sync playback
Thx good to know. Only wirh the resync button. Not with the tap button.
Laptop: XMG P507 // Intel i7-5500 / GTX-1060 / 1tb SSD / 32gb RAM // Lemur / BirdDog Studio NDI
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
Re: ReSync clears random BPM Sync playback
Hmmm. I tried to replicate this, but it stays on R no matter what I do.
Video clips, AV clips, setting it to R via the clip tab and the layer transport, tapping tempo, resyncing, multiplying bpm, pausing bpm, it just stays on R.
The only thing I can think of is that all our Win machines are currently running Win 8. Can anyone confirm this occurs for them on Win 7?
Video clips, AV clips, setting it to R via the clip tab and the layer transport, tapping tempo, resyncing, multiplying bpm, pausing bpm, it just stays on R.
The only thing I can think of is that all our Win machines are currently running Win 8. Can anyone confirm this occurs for them on Win 7?
Re: ReSync clears random BPM Sync playback
tried on win7, 4.1.11
what happens is when I click resync, the playhead jumps to the first beat , then continues playing linear, then on the 12th beat it begins jumping randomly again.
clip settings are not changing
what happens is when I click resync, the playhead jumps to the first beat , then continues playing linear, then on the 12th beat it begins jumping randomly again.
clip settings are not changing
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Re: ReSync clears random BPM Sync playback
Thanks for the corroboration.
Just to clarify - the mode stays on R but the play-head moves sequentially.
Just tested again on demo install (using benchmark file) again on Windows 7. Here, after resync, it plays sequentially but eventually returns to random mode sometimes after a few beats sometimes not until it has looped once.
Just to clarify - the mode stays on R but the play-head moves sequentially.
Just tested again on demo install (using benchmark file) again on Windows 7. Here, after resync, it plays sequentially but eventually returns to random mode sometimes after a few beats sometimes not until it has looped once.
Re: ReSync clears random BPM Sync playback
It sounds like a similar ticket we already have.
When you reset a clip set to BPM Sync Random to the beginning ( by retriggering or jumping to a cue point ), it will stick in Timeline mode until it reaches the point where it was retriggered and then continue in Random. This sounds pretty much like what you are experiencing, right?
The only thing is that for me, on MacOS and Win8, when I hit Resync and the clip is in Random mode, the clip is not reset to the beginning. In fact the playhead doesn't respond at all. It just keeps on playing in Random mode.
I'll install Win 7 on one of the test machines and see what that gives.
When you reset a clip set to BPM Sync Random to the beginning ( by retriggering or jumping to a cue point ), it will stick in Timeline mode until it reaches the point where it was retriggered and then continue in Random. This sounds pretty much like what you are experiencing, right?
The only thing is that for me, on MacOS and Win8, when I hit Resync and the clip is in Random mode, the clip is not reset to the beginning. In fact the playhead doesn't respond at all. It just keeps on playing in Random mode.
I'll install Win 7 on one of the test machines and see what that gives.