Strange behaviour / deck jumping R 5.01

Post your questions here and we'll all try to help.
Post Reply
User avatar
He2neg
Posts: 947
Joined: Fri Nov 22, 2013 21:34
Location: Berlin, Germany

Strange behaviour / deck jumping R 5.01

Post by He2neg »

Hey,

So after the New Year Show i did (everything worked fine)(i used r.5.00) i wanted to work a little on the Comp i messed up during the night and this happend :
~Ignore the first Crash~
* Decks keep jumping, LayerFocus also jumps sometimes
phpBB [video]



What i tryed to solve it so far:
- Upgrade from 5.0 to 5.01
- Reinstall 5.01 and deeinstall all other Arena Versions
-unplug Mouse / dissable Trackpad, short thought it was my mous sending strange stuff via usb
-Cry..
Laptop: XMG P507 // Intel i7-5500 / GTX-1060 / 1tb SSD / 32gb RAM // Lemur / BirdDog Studio NDI
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~

Zoltán
Team Resolume
Posts: 7605
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Strange behaviour / deck jumping R 5.01

Post by Zoltán »

start by looking at the osc settings and disable output.
also disable midi inputs.
I suspect you may have a signal loop somewhere.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

User avatar
He2neg
Posts: 947
Joined: Fri Nov 22, 2013 21:34
Location: Berlin, Germany

Re: Strange behaviour / deck jumping R 5.01

Post by He2neg »

ravensc wrote:start by looking at the osc settings and disable output.
also disable midi inputs.
I suspect you may have a signal loop somewhere.

Best idea ever =)
OSC was the problem and somehow there were some signals comming from were ever...

Ravensc offical :ugeek:
Laptop: XMG P507 // Intel i7-5500 / GTX-1060 / 1tb SSD / 32gb RAM // Lemur / BirdDog Studio NDI
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~

Zoltán
Team Resolume
Posts: 7605
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Strange behaviour / deck jumping R 5.01

Post by Zoltán »

if you send osc to localhost and the input port is the same as the output port, resolume tries to control itself with some latency, and you don't want that.
Your crash was most likely caused by this also.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply