Resolume arena 5 output issue

[Zoltán]

do you have an output when you set the output to windowed display 1?
what kind of videocard are you using?

When i select output to windowed display 1 a PART of the content shows only on my main display, not the projector.
My video card is gtx970m

ok that means your composition is working fine,
you are on a laptop right? can you try to switch resolume to the integrated card only, to see if that makes a difference, some users reported to have to disable a function in the bios to be able to output to the external display.viewtopic.php?f=12&t=13529&p=55528&hilit=bios#p55528

[Oaktown]

GUNDUDE500, disregard my previous post about DVI-I. I didn't see the m at the end of GTX970m so I didn't realize you were on a laptop.

[GUNDUDE500]

Doesn't your GTX970 have a DVI-I output which carries both analog and dual-link digital. All you have to do is get a DVI to VGA cable and you should be set.

In the advanced output all you need to do is assign your projector to the screen.

But my laptop doesnt have a DVI port. And why did it work with the TV and not with the projector ? :/

[pfelberg]

On Advanced Output, please check if your "slice" is englobing your content.
Select the existent slice, right-click on Advanced Output main stage > select WHOLE AREA.
Go to Output Transformation TAB and do the same.
Apply, close.
Any change?

[Sielmeth]

If the display or projector show "0x0 px" in the output settings, look your scaling if you are on Windows. (somewhere in the display settings of Windows (right click on descktop). If this scale is not to "100%",outputs on resolume 5 can have problems

[Daniel]

Are you running on Windows 10?