Fusion problem , no fusion in my output

[FabS]

Hi guys !

I have a little problem, when i'm doing a fusion with two layers, the fusion works well on resolume software but not on my output, why ?

I did a video to show you what's the problem :

phpBB [video]

thank you

[Oaktown]

What do you see in the advanced output when you preview the output transformation of that screen?

[FabS]

the same thing :

https://youtu.be/ZRIsxonXEhU

[Oaktown]

Can you describe your output setup?

[FabS]

Gelec PHANTOM P30

160x64 pixels

[Oaktown]

I'm not familiar with that particular panel and I can't find it online so can you send me a link to the spec sheet.

How are you connecting your computer to your panel?

Have you tested that same output with a regular HD display?

[FabS]

http://www.glec.de/download.php?article ... 201104.pdf


Macbook pro with resolume > Glec processor in DVI > fiber 100m > led screen

everything works well except fusion i don't understand why

[Zoltán]

I guess you have the slices in advanded outuput, slice input set to Layers, and slice 1 is probably layer 1 slice 2 from layer 2 and so on.
Check your input slices, on the right side you'll find a Input source dropdown, select Composition.
You don't need more slices than one if you are outputting from composition mix only.