Advance output

PERCYJOSEPH · Post by **PERCYJOSEPH** » Sat Oct 07, 2017 06:38

I would love to see key mapping and midi mapping works on advance output mode too so that we will be able to control slices where we keep different layout for different effects and can be controlled on live.

drazkers · Post by **drazkers** » Mon Oct 09, 2017 02:17

Def on the guys radar as this is like the 10th request. Right now you can use the layer router to hold you over. Not as nice but at least your not totally left out.

Oaktown · Post by **Oaktown** » Mon Oct 09, 2017 03:19

Arena 6 also has a nice new "Slice" feature where you can use all your advanced output slices in the composition/layer/clip level and it can be mapped.

Joris · Post by **Joris** » Mon Oct 09, 2017 06:23

use all your advanced output slices in the composition/layer/clip level and it can be mapped.

When it comes to control over routing content, this is the general direction that we'll be taking on future developments.

PERCYJOSEPH · Post by **PERCYJOSEPH** » Wed Oct 11, 2017 11:29

Sorry Joris
I didn't understand how to use this feature. Please advice me on how to do it.

drazkers · Post by **drazkers** » Thu Oct 12, 2017 04:17

PERCYJOSEPH wrote:Sorry Joris
I didn't understand how to use this feature. Please advice me on how to do it.

What version of Resolume are you using? Right now it can be confusing if people are on R5 and we talk about R6 features.

PERCYJOSEPH · Post by **PERCYJOSEPH** » Thu Oct 12, 2017 11:48

Hi. I am on Resolume Arena 6

PERCYJOSEPH · Post by **PERCYJOSEPH** » Fri Oct 13, 2017 04:47

"use all your advanced output slices in the composition/layer/clip level and it can be mapped." can somebody help me out on this, I couldn't figure out how to do this. I am on a award project and wanted to create a lot of different layout with the slices but earlier i used to load the different presets on the advance output but now as mentioned by the seniors i came to know that on and off of slices can be controlled by mapping. Please help

Joris · Post by **Joris** » Fri Oct 13, 2017 08:27

https://resolume.com/support/en/transfo ... arena-only

PERCYJOSEPH · Post by **PERCYJOSEPH** » Fri Oct 13, 2017 11:45

Hi. I am attaching an image file to show what my requirement is, Please check the image file.
I have created 2 slices from the same layer1, slice one showing the full screen the output same as the input and on slice two i have created a "make circle" from the same layer1. now on live what i wanted is to switch on and off these slices without opening the advance output window screen.

Resolume Forum

Advance output

Advance output

Re: Advance output

Re: Advance output

Re: Advance output

Re: Advance output

Re: Advance output

Re: Advance output

Re: Advance output

Re: Advance output

Re: Advance output