No image in Output Monitor after update

Post your questions here and we'll all try to help.
Post Reply
paull
Posts: 39
Joined: Tue Oct 07, 2008 07:58

No image in Output Monitor after update

Post by paull »

I updated Avenue 6 to 6.0.6 rev60545 yesterday and lost output to the output monitor. The correct output is going to the virtual output of the advanced output (See attached image)

Today I updated to 6.0.7 and still have the same issue.

On the same system Resolume Avenue 4 is working fine.

Probably pilot error.....

Thanks
Attachments
IMG_7080.jpg
Top
Zoltán
Team Resolume
Posts: 7603
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: No image in Output Monitor after update

Post by Zoltán »

You have the composition bypass on.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Top
paull
Posts: 39
Joined: Tue Oct 07, 2008 07:58

Re: No image in Output Monitor after update

Post by paull »

Thanks very much.

As I said pilot error...

How do I switch the composition bypass off?
Top
paull
Posts: 39
Joined: Tue Oct 07, 2008 07:58

Re: No image in Output Monitor after update

Post by paull »

Its OK I have sorted. Thanks again
Top
Post Reply

Return to “Problems? Bugs? Solutions!”