processsor use only at %50

zutim · Post by **zutim** » Mon Feb 28, 2005 10:47

i got an barebone shuttle P4 2,8 MHZ/ Matrox G550/ 120GB Maxtor 7200 rpm

after i read this topic i, looked at my task-manager and recognized that my prozessor also runs at about 50% while res 2.0 is running
when i put a few plugins on the clpis and one in each layer, the clips got slowerand jumped a little. my clips are in 320x240.
i lokked again at the task-manager and the prozessor still used 50%. why is it nut using more, whats wrong???

Anonymous · Post by **Anonymous** » Mon Feb 28, 2005 21:35

Hi DEVELOPERS !!!!

Resolume - is the BEST of the BEST for real VJ`s !!!
Thank YOU For Your HARD WORKING !!!

Are Resolume Support Hyper-Threading Technology from Intel ?

When i use Resolume - I see in "Task Manager" only 50% use my processor, But Not All play quickly!

May Be Developers can made 2 variants of distributive for Hyper-Threading Intel users and Other ?

May be Resolume can Learn use memory on videocards ???

May be This features users can use thru options in future versions ???

=========================================
VJ Vital - Revolutionary Ukraine
P-IV-3.2Prescott 2Gb Ram, Radeon X800Pro Vivo 256Mb

zutim · Post by **zutim** » Thu Mar 10, 2005 12:43

i found the problem of my 50% used prozessor. in the bios there was hyper threading activated, so win xp shared my single prozessor into two and used only 50% of the power. just disable this function in the bios and everything will run fine

thanx tim

Anonymous · Post by **Anonymous** » Sun Mar 13, 2005 18:21

what now?
more performance without HT or not?

Anonymous · Post by **Anonymous** » Thu Mar 24, 2005 15:15

Same het P4 3,4 Ghz. HT slows Resolume down. Performance is like running Resolume on a 1,6 Gz. P4 (my older system).

VJzoo · Post by **VJzoo** » Thu Mar 24, 2005 15:35

bugger, have to get a crappier lappy

juba · Post by **juba** » Thu Mar 24, 2005 16:37

i'm using a pentium M laptop, it has a variable cpu clock, when i don't use the utillity i get a 80% processor load...

dreamtk · Post by **dreamtk** » Sat Mar 26, 2005 06:48

Just went into bios and turned hyper-threading OFF, and now have 100% CPU throttle !

Don't know if it's my imagination or not BUT 3 global effects on 3 LAYERS (cinepack 320x240) seems to be running much better !

However this might bring another problem ..... i.e HEAT !

I'm running a shuttle and am worried of 8 hours 100% CPU usage. Hope i don't have CRASHES now !

Will TEST at tonights gig, and get back to you all

Edwin/Bart if you guys have any other ideas on this hyper-threading issue.. SHARE BABY .. SHARE !

[Edited on 26-3-2005 by dreamtk]

[Edited on 26-3-2005 by dreamtk]

dreamtk · Post by **dreamtk** » Sun Mar 27, 2005 05:11

update:

without 'HYPER-THREADING' my USB Sony-trv22 'LIVE' feed was working at half frames and jerky. (toooo slow !) no idea why.

seems like this was the only problem, but for me a large one !

Reverted back to 'HYPER-THREADING' and it was fine.

I'll be watching this thread with a lot of interest !

l8trz:)

Resolume Forum

processsor use only at %50

Support Hyper-Threading from Intel ?