CPU: i7-8700K
mai board: [ASUS] ROG STRIX Z370-H
GPU: GTX 1060 x2 + blackmagic decklink duo2
I want to use it.
Is it possible without any problems with the Resolum?
system setup
Re: system setup
A system is more than just than this but the components you're listing should be fine to run Resolume.
There are many things you can do to optimize your system but as a starting point, make sure you've got enough RAM, fast drive(s) and enough space on those drives.
Edit: The combination of (2) GTX1060 and (1) BMD Decklink Duo 2 cards is going to push your system since the GTX 1060 runs at 16x and the Duo 2 at 4x and the i7-8700K only has 16 PCIe lanes (Up to 1x16, 2x8, 1x8+2x4) and the Z370-H has the following lanes available (based on processor):
- 2 x PCIe 3.0/2.0 x16 (x16 or dual x8)
- 1 x PCIe 3.0/2.0 x16 (x2 mode)
- 3 x PCIe 3.0/2.0 x1
There are many things you can do to optimize your system but as a starting point, make sure you've got enough RAM, fast drive(s) and enough space on those drives.
Edit: The combination of (2) GTX1060 and (1) BMD Decklink Duo 2 cards is going to push your system since the GTX 1060 runs at 16x and the Duo 2 at 4x and the i7-8700K only has 16 PCIe lanes (Up to 1x16, 2x8, 1x8+2x4) and the Z370-H has the following lanes available (based on processor):
- 2 x PCIe 3.0/2.0 x16 (x16 or dual x8)
- 1 x PCIe 3.0/2.0 x16 (x2 mode)
- 3 x PCIe 3.0/2.0 x1
Re: system setup
SSD: 256G and 32G RAM I will use .
Re: system setup
The bottleneck in your system will be PCIe lanes.
Re: system setup
Is there any way to check the botleneck?