Resolume 6.1 on Mojave .. Problem!

[2Vision]

Ok so, i just back to High Sierra and Older resolume and there is no such a problem like on mojave, so maybe it will be easy to find solution. And as i can see the GPU is working lower and its on same percent without jumps.

Zrzut ekranu 2018-11-13 o 11.15.33.png (7.04 KiB) Viewed 5264 times

Zrzut ekranu 2018-11-13 o 11.11.25.png (84.25 KiB) Viewed 5264 times

how abot now ?

[Zoltán]

At least it's working fine now.
Was the mojave install a fresh install or an upgrade?

[2Vision]

Upgrade from the setup i posted before.

[veselyiveter]

The same problem even with eGPU. It drives me crazy. Macbook pro 2017 3.1 radeon 560 Mojave 14.2 clean install. 80% of the times o get around 60fps with 4 fhd layers, but suddenly it drops to 35-40fps even on 1 layer, stays there for 1-2 minutes and back to solid 60fps. Worth is that the same happenes with eGPU vega 56 8gb in Razer Core 2 enclosure, which runs 6 4k layers super smooth and then droping one layer to same 35-40.

[marachas]

The same problem even with eGPU. It drives me crazy. Macbook pro 2017 3.1 radeon 560 Mojave 14.2 clean install. 80% of the times o get around 60fps with 4 fhd layers, but suddenly it drops to 35-40fps even on 1 layer, stays there for 1-2 minutes and back to solid 60fps. Worth is that the same happenes with eGPU vega 56 8gb in Razer Core 2 enclosure, which runs 6 4k layers super smooth and then droping one layer to same 35-40.

Do you recommend using egpu?
The performance with egpu is remarkable enough or good enough to make the investment?
the problem of heating the mac by the graphics card is solved or reduced?

[veselyiveter]

After installing High Sierra problem solved! Thanks it has eGPU support. About eGPU: it totaly rocks! It is 1k investment, quiet macbook, loud eGPU), much much smoother playback! One thing: must use only eGPU outputs even for control monitor or u loose perfomance due thunderbolt 3 feedback to macbook.