FPS decreases every minute

IRellaXI · Post by **IRellaXI** » Wed Jan 01, 2020 21:05

Hi. I use latest version of Resolume Arena 7 and i have a problem with FPS. After turning on a column with 1 picture and 1 video in 2 layers, after 10 minutes i'll lose 0.15 fps from 60 every 5 minutes(after ~32 minutes i'll have 59 FPS / after 1 hour - 58 FPS). FPS will be jump to 59/58 and back every 3 seconds and on the projection i'll see freezes. The video is converted in Alley(1024x768) and filled in the project(1920x1080 60fps), output: DVI to projector(1920x1080), configuration: i7-9750H, GTX 1660 ti, 16 GB RAM.

Arvol · Post by **Arvol** » Wed Jan 01, 2020 21:38

Even at 25fps you shouldn't see freezes. What is your internal Hard Drive you have and I'm assuming Windows 10?

is your clip very long, or just a short clip you have set to auto-pilot?

Thanks and Happy New Year.

IRellaXI · Post by **IRellaXI** » Thu Jan 02, 2020 01:31

Arvol wrote: Wed Jan 01, 2020 21:38 Even at 25fps you shouldn't see freezes. What is your internal Hard Drive you have and I'm assuming Windows 10?

is your clip very long, or just a short clip you have set to auto-pilot?

Thanks and Happy New Year.

About HD i know only rpm - 7200. Ye, Windows 10 home. 15 seconds without auto-pilot.
Happy New Year.

Arvol · Post by **Arvol** » Thu Jan 02, 2020 02:20

Are you on Resolume 7.1?
I have 2 clips (4k) running for about 5 min. My fps doesn't drop below 59 and everything seems fine to me on my end. I have a nvme ssd installed but for what you're running, a 7200 rpm should be good enough. I've ran many shows with my fps down in the mid 40's before and I couldn't tell any difference.

What model is your PC? Some manufactures have issues with 3rd party add-on's, Maybe that is causing some interference?

IRellaXI · Post by **IRellaXI** » Thu Jan 02, 2020 13:30

Arvol wrote: Thu Jan 02, 2020 02:20 Are you on Resolume 7.1?
I have 2 clips (4k) running for about 5 min. My fps doesn't drop below 59 and everything seems fine to me on my end. I have a nvme ssd installed but for what you're running, a 7200 rpm should be good enough. I've ran many shows with my fps down in the mid 40's before and I couldn't tell any difference.

What model is your PC? Some manufactures have issues with 3rd party add-on's, Maybe that is causing some interference?

Yes, 7.1.0.
Laptop: MSI GL73-9SD-282NL

Arvol · Post by **Arvol** » Thu Jan 02, 2020 15:32

Have you removed Nahimic?
https://resolume.com/support/en/freeze- ... ing-output

IRellaXI · Post by **IRellaXI** » Sat Jan 04, 2020 21:54

Arvol wrote: Thu Jan 02, 2020 15:32 Have you removed Nahimic?
https://resolume.com/support/en/freeze- ... ing-output

I didn't have it).

Post by **Zoltán** » Sun Jan 05, 2020 09:30

Do you see GPU/CPU temps rise and frequencies fall with the FPS decrease?

IRellaXI · Post by **IRellaXI** » Thu Jan 09, 2020 00:19

Zoltán wrote: Sun Jan 05, 2020 09:30 Do you see GPU/CPU temps rise and frequencies fall with the FPS decrease?

Everything works stably without changes. I tested my PC(i7 7700, GTX 1050 ti, 16 GB RAM) with this project and my pc doesn't have problems with FPS... Tomorrow i will testing an other laptop and then write results

IRellaXI · Post by **IRellaXI** » Fri Jan 17, 2020 18:39

Hmm no, after few tests with 2 laptops and 1 pc without output, i got -fps on each of them(Also with old(7.0.4) versions RA).
After 4 hours:
MSI(GTX 1660 TI, i7-9750H, 16 GB 2666): -3 fps
ASUS(GTX 1060 6GB, i7-8750H, 16 GB 2666): - 3 fps
PC(GTX 1050 TI, i7-7700, 16 GB 2400): -0.5 fps

Resolume Forum

FPS decreases every minute

FPS decreases every minute

Re: FPS decreases every minute

Re: FPS decreases every minute

Re: FPS decreases every minute

Re: FPS decreases every minute

Re: FPS decreases every minute

Re: FPS decreases every minute

Re: FPS decreases every minute

Re: FPS decreases every minute

Re: FPS decreases every minute