Hello guys,
sorry If I choose the wrong topic of this forum but I think you probably can anser it.
I got Resolume 5 and I want to put on
Layer 4 (Screen (1920x1080)
Layer 1-3 (Pixel Strip Tunnel 1,2 and3)
Is it possible to say: everything on Layer 1-3 is only going to the specific Output?
I want only what is coming to Layer 4 to go to the Screen and not to the Pixel Strips aswell..
Does someone got an Idea?
Thanks a lot
Resolume 5 Output Restriction
Re: Resolume 5 Output Restriction
Sure its called "mapping" 
There are multiple ways to reach what you want.
Do you use Arena or Avenue?
You can dubble your composition and move layer 1-3 to lthe left and layer 4 to the right
you also can do something with bypass (layer) / ignore bypass (slice )
There are multiple ways to reach what you want.
Do you use Arena or Avenue?
You can dubble your composition and move layer 1-3 to lthe left and layer 4 to the right
you also can do something with bypass (layer) / ignore bypass (slice )
Laptop: XMG P507 // Intel i7-5500 / GTX-1060 / 1tb SSD / 32gb RAM // Lemur / BirdDog Studio NDI
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
