bpm syncing
bpm syncing
So, I have been experimenting with resolume wire and resolume avenue 7. I have noticed many ways to make wire sources sync with the bpm perfectly. My real question is, is there a way to accurately live sync bpm to tracks being djed? Like you have ableton link right and ableton has a tempo follow button but as soon as you turn the tempo follow on the link turns off. Is there any way to use these 2 in conjunction or some substitute that would do the same thing as tempo follow? I think this would have a ton of applications as wire grows.
Re: bpm syncing
You could try the getting a Midi clock from Ableton.
Won't be nearly as accurate as Ableton link though.
Won't be nearly as accurate as Ableton link though.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Re: bpm syncing
I´m not there yet with my integration of Resolume, but are you saying Resolume does not follow tempo received by Ableton Link? 
Re: bpm syncing
Didn't you say, Ableton link is disengaged in Ableton?
If Ableton disconnects from the link, Resolume won't have anything to follow.
If Ableton disconnects from the link, Resolume won't have anything to follow.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Re: bpm syncing
I´m not the OP 
, just got concerned that the Resolume Link implementation may have trouble when changing tempo. That would have broken my setup, which is: Link syncing Traktor, Live and Bitwig.
Now that I re-read the entry post (the third time ^^), it seems OP only faces an issue of concurrent time masters between "Link" and "Tempo Follow". Sorry for misreading that.
Please forget my earlier post, I´ll happily go forward and integrate Arena into the existing setup.
, just got concerned that the Resolume Link implementation may have trouble when changing tempo. That would have broken my setup, which is: Link syncing Traktor, Live and Bitwig.Now that I re-read the entry post (the third time ^^), it seems OP only faces an issue of concurrent time masters between "Link" and "Tempo Follow". Sorry for misreading that.
Please forget my earlier post, I´ll happily go forward and integrate Arena into the existing setup.
Re: bpm syncing
Ha, OK, need to sleep morec00kie wrote: Fri Sep 03, 2021 18:13 I´m not the OP
There is no tempo master in a Link. The nodes should follow change on any of the other nodes.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Re: bpm syncing
Agreed.
My wording was sloppy I meant: There is a "master" tempo, set by program x,y or z, whoever did the last update. The others adjust to what is sent in the protocol. My concern was that Arena may run into issues following that tempo, but since I misunderstood the OP that concern had no base to stand on
Sorry for the confusion.
My wording was sloppy
I meant: There is a "master" tempo, set by program x,y or z, whoever did the last update. The others adjust to what is sent in the protocol. My concern was that Arena may run into issues following that tempo, but since I misunderstood the OP that concern had no base to stand on Sorry for the confusion.