Pioneer ProLink Deck Target Incorrect

[knappy]

I'm not having luck with the assignment of a clip to the pioneer player determined.
No matter what I am setting the deck to, my first deck is going to layer 1 and the second deck, layer 2.

I want to assign them to 4 & 5 so that I can have other footage underneath.

Latest Resolume, MacOs 12.6

Pioneer ProLink Bridge 1.13 doesn't work on Mac M1 12.6 Using 1.10 instead. everything else seems to work except the target.

Thanks in advance.

[Zoltán]

Pioneer player determined will use the layer you set after right clicking the player

You'd also need to set the Clip target via the clip menu to pioneer determined, or the Composition Target and leave the clips on Composition determined

Bridge 1.10 won't have all the features Resolume needs, you'd need the one released in June.
Works fine for me on Ventura, make sure Firewalls are disabled.

[knappy]

Thank you. This is exactly what I'm doing so I'll chalk that up to Pioneer then with version 1.10. Unfortunately, 1.13 doesn't work for me on the M1 Mac. And can't really get it working on my Windows 10 machine. (ProLinkBridge works but Resolume doesn't see the timecode changing )

[Zoltán]

1.13 doesn't work for me on the M1 Mac

That's weird, worked for me on Monterey too.
How does it not work exactly?

[knappy]

It's been an open issue for me since it was released. I'm a showkontrol live user so hasn't been a real issue, but with the current bug with showkontrol->resolume not seeing the track information I tried prolink bridge.

ProLink Bridge opens and sees the decks and mixer but never goes green.... stays orange. No other prolink apps running on the network. I've talked to Pulse about it several times and no luck.

Show Kontrol works fine except in resolume I just see the time values, not the track information, and David says resolume bug. I just want to get it worked out.

[Zoltán]

ProLink Bridge opens and sees the decks and mixer but never goes green.... stays orange.

Try setting the Link and Node modes to Server explicitly, and not leave on auto.

[knappy]

Thanks. That seems to get them to go green on Windows but there are other issues with the Windows version of Prolink Bridge. Mixer firmware doesn't sow and thus Resolume doesn't seem to get the fader opacity (defaulting to 0 on the layers.

Target layer doesn't seem to work. Deck 2 (which is actually the left deck of two) targets layer 1 (even though I specify layer 2 or 3) and deck 3 (2nd deck on the right of the mixer) targets whatever target I specify -1.

This in my windows machine.

[Zoltán]

Mixer FW not showing up in the bridge sounds like incompatible mixer.
Which mixer do you have?

Firewalls off?

[knappy]

Mixer is Pioneer DJM900-nxs2 firmware 2.07
Firewall is off.

[Zoltán]

ok, a mixer should not be required though for the layer targets.
Any luck getting the latest bridge app working on mac?

How do you have the network devices set up? What's their priority /order?