formatei o computador e fiz todas as atualizacoes de drivers.
fiz tudo como deve ser.
na hora de abrir o programa aparece uma mensagem alertando sobre um erro.
"Arena
Application failed to initialize. make sure your system meets the system requirements, eg OpenGL Version 4.1"
nao estou conseguindo resolver
a placa é AMD Radeon RX 6900 XT
agradeco muito a ajuda! Por favor Obrigado
=================
Processador 12th Gen Intel(R) Core(TM) i9-12900K 3.20 GHz
RAM instalada 64,0 GB (63,7 GB utilizável)
Edição Windows 10 Pro
Versão 22H2
Instalado em 09/01/2023
«««
GPU - AMD Radeon RX 6900 XT - Independente
VRAM - 16368 MB - GDDR6 2000 MHz
Placa gráfica - AMD Radeon RX 6900 XT
Problema para inicializar
-
- Posts: 2
- Joined: Tue Jan 10, 2023 11:31
Problema para inicializar
Last edited by thiagomullervj on Tue Jan 10, 2023 11:42, edited 1 time in total.
Re: Problema para inicializar
Please check your system meets the minimum System Requirements. https://resolume.com/support/en/tech-specs
If you believe it does, please update your graphics drivers, and/or make sure Resolume is assigned to your dedicated GPU and your primary display is connected to the renderer card.
If you believe it does, please update your graphics drivers, and/or make sure Resolume is assigned to your dedicated GPU and your primary display is connected to the renderer card.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
-
- Posts: 2
- Joined: Tue Jan 10, 2023 11:31
Re: Problema para inicializar
ja atualizei tudo e coloquei o resolume para usar a placa de video na preferencia do desempenho grafico. nao deu certo.
atualizei o directx tambem.
tambem nao deu certo
muito obrigado pela resposta e tentativa de ajuda
atualizei o directx tambem.
tambem nao deu certo
muito obrigado pela resposta e tentativa de ajuda
Re: Problema para inicializar
Are you sure the displays are not connected to the motherboard?
Did you set windows to performance power profile, and assigned the Resolume to use the dedicated GPU, in Windows or GPU driver?
Did you set windows to performance power profile, and assigned the Resolume to use the dedicated GPU, in Windows or GPU driver?
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu