Hiya.
Sorry for the basic question here.
I have one Mac running Resolume Arena and would like to make it the master to a slave computer running madmapper. My cues are basic (next column on resolume should trigger next column on madmapper).
I understand that best way is to link them with ethernet cable and go for osc? I also found midi audio setup in a tutorial, but not sure if I can send out midi signals, that was possible with Ableton.
Thanks!
Network trigger from Resolume to Madmapper/ 2 macs
Re: Network trigger from Resolume to Madmapper/ 2 macs
These might help https://resolume.com/blog/8717/max-for- ... me-patches
and you can read about OSC output here: https://resolume.com/support/en/osc
and you can read about OSC output here: https://resolume.com/support/en/osc
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
-
shudder_inc
- Posts: 21
- Joined: Sun Dec 27, 2015 06:54
Re: Network trigger from Resolume to Madmapper/ 2 macs
The Audio MIDI Setup app in macOS should be able to do this for you. Once the computers are set up, the network session should show up in preferences as a MIDI device. Then set Resolume to output and MadMapper to input.
https://support.apple.com/guide/audio-m ... ms1012/mac
I used the above link and with one computer started a session, launched Resolume, and the network session appeared as a MIDI device. I've no MadMapper experience but I imagine it's a similar process
https://support.apple.com/guide/audio-m ... ms1012/mac
I used the above link and with one computer started a session, launched Resolume, and the network session appeared as a MIDI device. I've no MadMapper experience but I imagine it's a similar process