Autopilot issue

Post your questions here and we'll all try to help.
Post Reply
User avatar
zaniz
Posts: 45
Joined: Thu Aug 09, 2007 03:12
Location: Sao Paulo - Brazil

Autopilot issue

Post by zaniz »

Hi Guys !
I have a gig with lots of led panels, in one of them, I want to show about 30 loops automatically in sequence while I play the other led panels with the music.
I create a composition with 4 layers in 2 groups. layers 1, 2 and 3 in one group for the majority of the led panels. Layer 4 is in a group exclusively for the 30 loops automatic sequence for a single led panel, these loops are set to play next clip automation, with the last one set to return to the first loop to restart the sequence. I use 2 groups for the effects in one group dont affect the other group.
This 30 loop sequence works fine while I stay in the deck where all the 30 loops are.
My problem is when I start to play loops in other decks for the rest of the panels (layers 1,2 and 3), the automation in layer 4 stops. If I get back to the deck where all the 30 loops are, the sequence automation restart
I just want to play loops in other decks while the automation runs in background changing loops in layer 4, is this possible ?

Thanks for the attention

Zoltán
Team Resolume
Posts: 7483
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Autopilot issue

Post by Zoltán »

Decks which are not loaded, don't have the clips loaded.

Set the clip you want to keep playing in auto pilot after deck switch to persistent.
https://resolume.com/support/en/clips#persistent-clips
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

User avatar
zaniz
Posts: 45
Joined: Thu Aug 09, 2007 03:12
Location: Sao Paulo - Brazil

Re: Autopilot issue

Post by zaniz »

I put al the 30 loops in persistent mode and now everything works.
Many Thanks Zoltan !

Post Reply