Hi,
a debouncingoption would be great.
Greetz Chris
Debouncing
Re: Debouncing
Sounds great!
What would that do?
What would that do?
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Re: Debouncing
Laptop: XMG P507 // Intel i7-5500 / GTX-1060 / 1tb SSD / 32gb RAM // Lemur / BirdDog Studio NDI
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
Re: Debouncing
I don't know anything about debouncing.... but I really like it!
+1 from me!
+1 from me!
Do you like outlines? Easy Outliner on Juicebar Re: Debouncing
Debouncing means, that for example a clip would not be triggered again, when this clip has been triggered max x ms before. Therefore there could be a slider (0-1000 ms) for example.
Greetz Chris
Re: Debouncing
may you describe the use-case in which you would uses such a function?
Do you like outlines? Easy Outliner on Juicebar Re: Debouncing
For example when a clip should be triggered by motion and two PIR-sensors has been installed, because of fail-safety.
Second example is an installation with bouncy push button switches.
When it's in advance clear, that there will be no need to trigger faster than 1000 ms, then this is a welcome option in the eventindustry, when Resolume is used as a mediaserver.
Greetz Chris
Second example is an installation with bouncy push button switches.
When it's in advance clear, that there will be no need to trigger faster than 1000 ms, then this is a welcome option in the eventindustry, when Resolume is used as a mediaserver.
Greetz Chris
Re: Debouncing
Setting the clip playModeAway to continue from last position would probably help a lot with this: https://resolume.com/support/en/video#playmode-away
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Re: Debouncing
Ahha... Now i know what i want...debouncing 
Its kind of the play ahead solution but also not....
I had a corparate job and i wanted a playmode:
When i click it the clip starts from the beginning, but then it cant be stoped till the end... so i cant excidently start it again.
Ofc you just pay attention and dont click, but a fool proof safety also would be nice...
The Problem to play ahead or realativ pick up was that i couldnt start it from the beginning easy but had to "reset" it somehow when i preview it before the show...
Soo Team Resolume may understand now what i would like to have and it may be called debouncing.
Its kind of the play ahead solution but also not....
I had a corparate job and i wanted a playmode:
When i click it the clip starts from the beginning, but then it cant be stoped till the end... so i cant excidently start it again.
Ofc you just pay attention and dont click, but a fool proof safety also would be nice...
The Problem to play ahead or realativ pick up was that i couldnt start it from the beginning easy but had to "reset" it somehow when i preview it before the show...
Soo Team Resolume may understand now what i would like to have and it may be called debouncing.
Laptop: XMG P507 // Intel i7-5500 / GTX-1060 / 1tb SSD / 32gb RAM // Lemur / BirdDog Studio NDI
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~
