Connecting to MA while using NDI

Just let it all out, buddy. You're among friends here.
Post Reply
Dave01
Posts: 1
Joined: Sat Mar 26, 2022 23:31

Connecting to MA while using NDI

Post by Dave01 »

Hi!

When using ndi I can not connect arena to my MA with artnet.

If I use static ip I always loose connection to the laptop backstage that runs the led screens.

Using 192.168.x.x
Subnet 255.255.255.0 (all computers) and
2.0.0.5/255.0.0.0 for artnet

How can I make this work?

Zoltán
Team Resolume
Posts: 7483
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Connecting to MA while using NDI

Post by Zoltán »

I don't think you can have two IP addresses active on the same NIC.

Should be doable using an USB Ethernet adapter probably. You'd have an IP in the 2.0.0.0/8 range, on one adapter, then another adapter with the 192.168.0.0/24 range

NDI should route automatically, and You can choose the Artnet adapter in the Arena DMX preferences.

Or just set all the machines to the same IP range and addresses.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply