DMX Example file comment mistake

stanleystark · Post by **stanleystark** » Fri Oct 06, 2006 14:03

Hi, there seems to be an unimportant mistake on the DMX example flash file

its on the comments...
it says
//DMX values range from 1 to 512
//DMX channels range from 1 to 512

as far as I understand each DMX512 cable transmits up to 512 eight-bit values, between 0 and 255 ... so the value range should be from 0 to 255 and not 1 to 512 (that is only for channels)

Post by **edwin** » Wed Oct 11, 2006 09:30

Hi,
hmmm... yes your right. I will fix the comments.

Thanx
Edwin