Can I create a canned video performance

Jim Jackson_ · Post by **Jim Jackson_** » Sat May 24, 2003 15:41

I would like to create a canned video performance and then be able to walk away from the workstation while the program plays the session. Is this possible? Seems to be great software BTW. This would be like queuing up 30 to 50 viseos at once and letting it run for four hours. If I can do this I would also like to insert an advertising clip every so often so that the order would be video 1, video2, video3, video4, ad1, video5, video6, video7, video8, ad2, ect... Let me know if it can be done.

Thanks,
Jim

komar_ · Post by **komar_** » Sun May 25, 2003 17:09

make some tests with the chaos functiun of the soft,i did it with a painter's work to give a random show,it was fine !

martijn_ · Post by **martijn_** » Mon May 26, 2003 08:47

try considering a midi sequencer (soft- or hardware).

I did some tests with it and it works great. I used cubase sx, you van even modify controllers (fades, clip speed, etc) with it.

It's quite a lot of work, but when you're done, you can walk through the crowd with a 'fake' remote control, pretending to be VJ-ing 'live'

Martijn