Resolume Forum

Hi folks!

I have a project with H802RA artnet SPI Chinese led controller (4 out universes) and led pixels on ws2812 chip. Now I can only make 170 LED pixels in one universe or 510 channels at most. But the controller can support 1024 or even 2048 pixels per port. Chinese software like LED studio ...

Hi folks! How can you make the management of the shutter on the projector Barco. This projector can accept hex commands over the network(FF A0 01 00 CC B2 etc..). Is there any soft that can convert art-net or osc into such commands? Solution?

I put the arena profile back to defualts, and changed the opengl rendering gpu to the 1060, and set the power mode for it to high performance. vysnc is back to 3d application defaults and this seems to get me 60fps without tearing.
I'll get 1 tear a min when doing a white strobe with a frequency of ...

I frequently use 1 or 2 Datapath X4 units with a macbook pro and even though you really can't output many layers of 4K/8K, it works fine. Take a look at this post.

Yes is work fine, because all outputs macbookpro 2013 is real dual link DVI, but cheap pc laptop usually isn't dual link output...

You most likely will not be able to give your laptop with 4K resolution, because videocard is poor... If you want split 1920*1080 then setting: 1 region 0*0 960*540 2 region 960*0 1920*540 3 region 0*540 960*1080 4 region 960*540 1920*1080. Monitor outputs then 960*540 50 or 60hz for all outputs

For smoother moving images on the x y coordinates, intensity, and some other parameters, I would like to see 16-bit DMX channels. Thank You!

There is a problem with dmx control. As for scale control, the shift to the coordinates x, y, using an 8-bit channel (0-255), a shift occurs in discrete steps. Sometimes you need to smoothly increase in the movement of the window or make travel clip left or right smoothly. In other media servers ...