black lines with DVD MAX & ATI

kryztof_ · Post by **kryztof_** » Fri Apr 02, 2004 18:35

greetings everyone!

i have a problem when using the video overlay function with resolume!
if theater mode for my RADEON card is enabled and the DVDmax option is turned on in resolume, i can see the previewindow fullscreen. but when i turn a layer's alpha to 100%, i get black flickering lines across the picture!
anyone experienced something like that so far? how can i solve that problem?

regards,
kryztof

DinkyToys_ · Post by **DinkyToys_** » Fri Apr 02, 2004 19:00

Do you have it on the left side?
Restart you're pc and try again.

kryztof_ · Post by **kryztof_** » Sat Apr 03, 2004 15:58

on the left side?
the thin black lines appear horizontal on the ower part of the screen...if you meant that
restart is not solving the problem!
any other ideas?

kio_ · Post by **kio_** » Sat Apr 03, 2004 17:40

the same problem for a long time..until now no solution

graben 12_ · Post by **graben 12_** » Sat Apr 03, 2004 19:46

hi!!!

I`m also a victim of the black flickering bars!(using ati radeon)
But......
there`s an ok solution to get rid of these horizontal "dancers".

_first you should enable all three layers of resolume!
_the next thing is, that the value of opacity and speed shouldn`t be 100 percent, or 0 percent.

for example:
if you use 98 percent opacity instead of 100 percent, or 2 percent speed instead of 0 percent, your flickering bars will appear!
(adujust this on all three layers)

good luck

ciao

graben 12

graben 12_ · Post by **graben 12_** » Sat Apr 03, 2004 19:49

sorry, i mean_ with this settings your flickering bars will disappear!!!!!!!!!!!!!!!!!!!

greetings
graben 12

lotech_ · Post by **lotech_** » Mon Apr 05, 2004 05:46

Your problem could actually be the video-out from your card. Most TV-out chip used on cards can use cheap and nasty parts. There is a big difference in general TVout quality between cheap asian companies and more expensive brands, such as ATI originals.
The only really way to get rid of lines is the investment in a good scanconverter to take advantage of the 2nd VGA port on you computer.

DinkyToys_ · Post by **DinkyToys_** » Mon Apr 05, 2004 15:49

When I have on layer 3 an clip running and set on layer 1 the LK at > 99%. Layer 3 becomes transparant.
But on my preview screen in Resolum self, it's not. Only on the TV-Out.

Maybe the 16bits and 32bits settings or something??

cpt. awesome_ · Post by **cpt. awesome_** » Tue Apr 06, 2004 09:09

having the same problem. is there anbyone, who does not have these certain lines, when running in overlay mode?
any comment from the developers regarding this problem?

cheers,
...::: cpt. awesome :::...