short clip restarting?

Post your questions here and we'll all try to help.
Post Reply
Zoltán
Team Resolume
Posts: 7603
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

short clip restarting?

Post by Zoltán »

I have some short clips which were converted to dxv from png, an they are <1s length.
I set them to hold last frame, then after some time holding(I didn't count but it could be a few minutes), I see the playhead jump back to start and playing again.
I don't know if it's just the playhead, or the clip is actually playing again as my clips are still images.
I don't touch anything when that happens.

here is a txt file containig the clip xml
https://cloud.palffyzoltan.hu/owncloud/ ... 00d578834c
and a .mov that produced this.
https://cloud.palffyzoltan.hu/owncloud/ ... 7397375b73
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Joris
Posts: 5186
Joined: Fri May 22, 2009 11:38

Re: short clip restarting?

Post by Joris »

I don't know what to tell you. Just spent 30 minutes watching your still and nothing's happening.

It's really highly unlikely that Res would restart a clip when you leave it alone. Are you sure there aren't any outside triggers coming in?

If you're sure this is a problem on our end, maybe you can test it in a sandboxed fresh comp, without any OSC wizardry running in the background. If it's doing it still, I'll happily recreate your setup and sit and watch it again.

Zoltán
Team Resolume
Posts: 7603
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: short clip restarting?

Post by Zoltán »

Joris wrote:I don't know what to tell you. Just spent 30 minutes watching your still and nothing's happening.

It's really highly unlikely that Res would restart a clip when you leave it alone. Are you sure there aren't any outside triggers coming in?

If you're sure this is a problem on our end, maybe you can test it in a sandboxed fresh comp, without any OSC wizardry running in the background. If it's doing it still, I'll happily recreate your setup and sit and watch it again.
thank you, I'll try to recreate,
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply